Student Achievement
National / International Conference
Events Prize Winner
Cash Prize for Semester Toppers
Staff Journal Publications
FDP Attended By Faculty
Events Attended by Staff
Rank Holders
Staff Awards
Events Conducted
Best Teacher Awards
Cash Award
2016-2017 Events
Workshop / Seminar
Short Term Courses
Guest Lectures
IPR Details
Other Events
E-Bike is a competition to design and fabricate an ELECTRICAL BIKE which is
operated by a motor, where the source of running the motor is a battery. The
competition will not only help students to build an interest towards automobiles
but also help them to incorporate team work and management skills within
themselves.
The project aims in design and fabrication of the electric bike withCrest
Roller, Emergency Fire Arrestor and Smart Display. The wheels of the bike have
been selected for the muddy roads and inclination of the roads. Comparing to
existing electric bikes that runs at 35km/hr. Our bike is designed such that it
can run at 60km/hr.
This project is highly feasible and more than the feasibility this system can be
replacement to all existing vehicles. This would eliminate the pollution caused
by vehicles. This will have a greater impact on the society and market.
Department of Mechanical Engineering -IV year and III year Students have Participated in “E-Motor Championship-2016” at Shri Vishnu Engineering College for women, Hyderabad.
S.no | Name of the Student | Title | Date | College | Status - National / International |
1. | P. AROKIARAJ,M. ASWIN KUMAR,D. GOPI | A Study Of Factors On Influencing The Performance Of Natural Draught Cooling Tower | 5th April 2014 | Josephs Institute Of Technology, Chennai | National Conference |
2. | ARAVIND.KLOGESH KUMAR.MRAJESH.BRAVINDHAR.V | Analysis And Elimination Of Hydrogen Embrittlement Failure In Steel Weldment | 5th April 2014 | St. Josephs Institute Of Technology, Chennai | National Conference |
3. | AARON RABI.DABINESH.IHARISH KUMAR.CKAMALA NATHAN.M | FEA And Experimental Investigation Of Ceramic Coating On Aluminum Piston By Plasma Ray Technique | 20thMarch2014, | Velammal Engineering College, Chennai | National Conference |
4. | AMEEN ISATH.AADHITH NAGARAJ.SPRASATH.V.R | Solar Parabolic Concentric Collector With Integrated Heat Storage System Using Phase Changing Material | 15th Jun-2014 | National Institute Of Technology, Tiruchirappalli | International Conference |
5. | ARUN.IMAHESHWAR.MSARATH KUMAR.C.PSRINIVASAN.M | Experimental Analysis Of Disc Brake In Composite Materials Using Ansys | 15th Jun-2014 | National Institute Of Technology, Tiruchirappalli | International Conference |
6. | N.M MANJUNAATHPRAVEEN.SSUDHAGAR.A | Condition Monitoring & Analysis Of Two Stroke Petrol Engine With Blended Fuels. | 20thMarch 2014 | Velammal Engineering College, Chennai | National Conference |
S.no | Name of the Student | Title | Date | College | Status - National / International |
1. | ARUN KUMAR.A.VNAVEEN.BSASTHA KUMAR.UYASWANTH. M | Extraction of Green Energy in R&AC | 1, Jan 2015 | IJSR | International Journal of Science And Research |
2. | KAMALAHAR.TKARTHIK DHAYAKARMANOJ.R.SVINU SAKTHI.T | Front Mono shock suspension in Motor cycle | Mar-Apr 2015 | IOSR | IOSR Journal of Mechanical and Civil Engineering(IOSR-JMCE), |
3. | GUNALAN.RKUMARAN.SNAVEENKUMAR .AVIJAY ANAND.A | Analysing the strength of friction stir welding Aluminum (6063) plate | Mar-Apr 2015 | IOSR | IOSR Journal of Mechanical and Civil Engineering(IOSR-JMCE), |
4. | KAMALAKANNAN.VKISHORE KUMAR.KPOOVARASAN.TVIGNESH.G | Analysis of Re-heater tube failure in boiler at MIPS-I | 9th and 10th April 2015 | RVS – Technical Campus, Coimbatore | National conference |
5. | BHARATH.DVARUN.PJAGANADHAN.CSETHUNIVAS.V | Analysis of Composite Deck Plate for Marine Structure Instead of Mildsteel | 26 and 27 march 2015 | Jeppiaar Engineering college, Chennai | International Conference |
6. | ARUN KUMAR. BCALVIN SAMUEL.SVENKATESAN.M | Durable test facility by Combining Rotary and Monoblock fuel injection pump | 24th and 25th April 2015 | Vels university, Chennai | International Conference |
7. | KALAIMANI.SNANDHA KUMAR.C.RSANTHOSH.VTHIRUKUMARAN.R | Analysis of Disc brake by Aluminium-Slica Composite material. | March 15, 2015 | Sri Ramanujar Engineering College, Chennai | International Conference |
8. | DEEPAKCHANDAR.MDURAIMURUGAN.SMOORTHY,MSIVABALAN.R | Analysis of Quality Issues in Taper shank twist drill | 22 and 23 May 2015 | Nehru Institute of Engg. & Technology, Coimbatore | National conference |
9. | MOHAMMED ZUBAIR.IRENGARAJ.VSIVAMANI.KSUBRAMANIAM.C.S.H | Design and Experimental study on Braille Embosser | 22 and 23 May 2015 | Nehru Institute of Engg. & Technology, Coimbatore | National conference |
S.no | Name of the Student | Name of the Event/ Title of the Program | Venu | Date | Participation / Award |
1 | Jason Daniel M | Singapore Autonomous Under Water Vehicle Competition/ SAUVC-2014-15 |
Singapore Polytechnic | 06.03.2015 To 08.03.2015 |
Participated |
2 | Arvind Kumar S | Singapore Autonomous Under Water Vehicle Competition/ SAUVC-2014-15 |
Singapore Polytechnic | 06.03.2015 To 08.03.2015 |
Participated |
3 | Jason Daniel M Raviraja S Bhuvaneshwaran P Keerthivasan S Rohit M Prabhu M Naveein E Naveen G Om Prakash R Harwin Ramoj R Rajkumar V Arvind Kuumar S |
23rd Singapore Robotic Games 2016 (RC Sumo Robot Competition) |
Tay Eng Soon Convention Centre, Singapore | 27.01.2016 To 28.01.2016 | Participated |
S.no | Name of the Student | Name of the Event/ Title of the Program | Venu | Date | Participation / Award |
1 | Bhuvanesh G | Paper Presentation/ Expro’13 | Madras Institute Of Technology, Chennai. | 10/04/2013To
11/04/2013 |
Participated |
2 | Arun Raja B | Impulse’12 | R.M.K. Engineering College,Chennai. | 12/9/2012 | Participated |
3 | Jayanthan V.S | Participated | |||
4 | Aswin Kumar M | Participated | |||
5 | Pradyumna Reddyallampatti | Just In Tim Just In Time, Assemble&
Dismandle, CAD Modeling/Mexplosion’12 |
Anand Institute Of Higher Education,Chennai. | 28/09/2012 | Participated |
6 | Mallu Vijay Bhargavreddy | Participated | |||
7 | Sivachandran S | Paper Presentation&CAD Modelling/Maquinas’12 | R.M.K. College Of Engineering And Technology,Chennai | 24/09/2012 | Participated |
8 | Aswin Kumar M | Participated | |||
9 | Jayanthan V.S | Participated | |||
10 | Adhith Nagaraj S | Participated | |||
11 | Aswin Kumar M | CAD Modelling/Maquinas’12 | Participated | ||
12 | Jayanthan V.S | 1st Place | |||
13 | Adhith Nagaraj S | 2nd Position |
S.no | Name of the Student | Name of the Event/ Title of the Program | Venu | Date | Participation / Award |
1 | Deepak Chandar M | Indo – US Robo League/Workshop On Robotics | Velammal Engineering College | 30/08/2013 & 31/08/2013 | 2ndPlace |
2 | Hameed | Paper Presentation/ CRANKX 2K13 | SSN College Of Engineering | 6/9/2013 | Participated |
3 | Yaswanth.M | Participated | |||
4 | Hameed | Workshop On Introduction To CFD/ CRANKX 2K13 | Participated | ||
5 | Yaswanth.M | Participated | |||
6 | Manigandan.S | Participated | |||
7 | Raja Samuel.R | Participated | |||
8 | Preetham.C | Participated | |||
9 | Sivamani.K | TCS Innovate/KURUKSHETRA2014 | College Of Enginering, Anna University, Chennai | 29/01/2014 To 01/02/2014 | Finalist |
10 | Mohammedzubair.I | Finalist | |||
11 | Krishnan.V | Finalist | |||
12 | Ajith A | Paper Presentation/YANTRA ‘ 14 | Meenakshisundararajan Engineering College | 19/02/2014 | Participated |
13 | Arunkumar.A.V | Participated | |||
14 | Duraimurugan.S | Participated | |||
15 | Naveen B | Paper Presentation/YANTRA ‘ 14 | Participated | ||
16 | Ramalingam P | Participated | |||
17 | Nanda Kumar M | Participated | |||
18 | Yaswanth M | Participated | |||
19 | Arunkumar A.V | Quiz/YANTRA ‘ 14 | Participated | ||
20 | Duraimurugan S | Participated | |||
21 | Yaswanth M | ISTE | Baba Banda Singh Bahadur Engineering College (Punjab) | March 2014 | Best Project |
22 | Yaswanth M | Nirman/TORQUE’14 | Jawaharlal Nehru Technological University, Kakinada. | 29/03/2014 And 30/03/2014 | 2nd Place |
23 | Arunkumar A.V | 2nd Place | |||
24 | Naveen B | 2nd Place | |||
25 | Sastha Kumar U | 2nd Place | |||
26 | Kishore Kanna P | Junkyard Wars Lectures/Mechanica’2014 | Indian Institute Of Technology, Chennai. | 21/03/2014 To 23/03/2014 | Participated |
27 | Mohan Raj S | Participated | |||
28 | Naveen Kumar T | Participated | |||
29 | Nagarajan M.S | Auto Anatomy/ Pinnacle’2014 | CEG, Guindy | 13/03/2014 To 15/03/2014 | Participated |
30 | Karthick Raja S | Innovate And Brain Buzz/Pinnacle’2014 | Participated | ||
31 | Naveen Kumar T | Innovate, I-Motto/Pinnacle’2014 | Participated | ||
32 | Arun K.S | Auto Anatomy Workshop/Pinnacle’2014 | CEG, Guindy | 15/03/2014 | Participated |
33 | Daniel R | Auto Anatomy Workshop/Pinnacle’2014 | CEG,Guindy | 15/03/2014 | Participated |
34 | AaronRabi DAbinesh IHarish Kumar C, Kamala Nathan M | FEA And Experimental Investigation On The Ceramic Coating On Aluminium Piston By Plasma Ray Technique/ETAT’2014 |
Velammal Engineering College, Chennai | March’2014 | Presented The Paper |
35 | Manjunaath A.N.M Praveen SSudhagar A | Condition Monitoring & Analysis Of Two Stroke Petrol Engine With Blended Fuels/ETAT’2014 |
Velammal Engineering College, Chennai | March’2014 | Presented The Paper |
36 | Aravind KLogesh Kumar MRajesh BRavindhar V | Analysis And Elimination Of Hydrogen Embrittlement Failure In Steel Weldmen/Recent Trends In Engineering And Technology |
St.Joseph Institute Of Techniology, Chennai | April’2014 | Presented The Paper |
37 | Arokiaraj PAswin Kumar MGopi D | Thermal Performance Analysis Of The Natural Draft Cooling Tower/Recent Trends In Engineering And Technology |
St.Joseph Institute Of Techniology, Chennai | April’2014 | Presented The Paper |
S.no | Year/Sem | Name of the Student | Name of the Event/ Title of the Program | Venu | Date | Participation / Award |
1. | Jawahar P | IV/V | Mechanical CADD design & development/Workshop | Diagonal CADD-Porur | 20/07/2014 | Participated |
2. | Arun K.S | IV/V | Mechanical CADD design & development/ Workshop | Diagonal CADD-Porur | 20/07/2014 | Participated |
3 | Naveen kumar T | III / V | CAD – CATIA Modelling/ FLUTTER’ 2K14 | JEPPIAAR Engineering College | 24/07/2014 | Participated |
4 | Mohan raj S | CAD Modelling/ MECHFLAREZ’ 2K14 | 24/07/2014 & 25/07/2014 | Participated | ||
5 | Ramanand B | Participated | ||||
6 | Ramesharvind V N | Participated | ||||
7 | Vigneshwaran S | III / V | Paper Presentation/ PRATIYOG’ 2K14 | 24/07/2014 & 25/07/2014 | Presented | |
8 | Naveen kumar T | Presented | ||||
9 | Ramanand B | CAD Modelling/ PRATIYOG’ 2K14 | Participated | |||
10 | Mohan raj S | Participated | ||||
11 | Ramesh arvind V N | Participated | ||||
12 | Naveen B | II / III | Paper Presentation/ PANCHSHEEL – 2014 | Prince Sri Padmavathi Engineering College, Chennai | 26/07/2014 | Won 3rd prize |
13 | Dhayanand T | III / V | Paper Presentation/ DYNAMIX ’14 | S A Engineering College, Chennai | 7/8/2014 | Presented |
14 | Dilip kumar M | Presented | ||||
15 | Raja Samuel R | IV / VII | Quiz/ DYNAMIX ’14 | Won 1st place | ||
16 | Duraimurugan S | Won 2nd place | ||||
17 | Sujay R | Paper Presentation/ DYNAMIX ’14 | Presented | |||
18 | Yaswanth M | Presented | ||||
19 | Arunkumar A V | Presented | ||||
20 | Sivamani K | Presented | ||||
21 | Naveen B | II / III | Quiz/ SAIMECH – FLITZEN 2K14 | Sri Sai Ram engineering college | Won 2nd place | |
22 | Yaswanth M | IV / VII | Paper Presentation/ SAIMECH – FLITZEN 2K14 | Sri Sai Ram Engineering College | 8/8/2014 | Won 2ND Place |
23 | Arunkumar A V | |||||
24 |
|
II/III | RC Cars Workshop/ DXM’11 | Velammal Engineering College | 9/8/2014 | Participated |
25 | Hariprasath S | IV/ VII | Paper Presentation Technozap, Techno connect/ TWYSTRA | RMK Engineering College | 11/8/2014 | Participated |
26 | Duraimurugan S | Participated | ||||
27 | Naveen B | Participated | ||||
28 | Keerthivasan V | II / III | Automobile Workshop/ YANTRA’14 V2.0 | Meenakshi Engineering College | 13/08/2014 | Participated |
29 | Aravindh G | Participated | ||||
30 | Naveein E | Participated | ||||
31 | Prabhu M | Participated | ||||
32 | Bibin S | IV/ VII | Quiz/ YANTRA’14 V2.0 | Participated | ||
33 | Bala anand R | Paper Presentation/ YANTRA’14 V2.0 | Presented | |||
34 | Arun K S | Presented | ||||
35 | Baskaran K | IV/ VII | Paper Presentation/ MESSI ‘ 14 | Sri Sai Ram Institute of Technology | 20/08/2014 | Presented |
36 | Daniel R | Presented | ||||
37 | Dhayanand T | First place | ||||
38 | Dilip kumar M | First place | ||||
39 | Bhuvaneshwaran P | II/III | Paper Presentation/ THROTTLEZ’15 | Dhanalakshmi College of Engineering | 24/08/2015 | Presented |
40 | Bhuvaneshwaran P | II/III | Mr.Manufacturer Event/ THROTTLEZ’15 | Dhanalakshmi College of Engineering | 24/08/2015 | Participated |
41 | Vijay anand A | IV/ VII | Paper Presentation/ MECHAHOLICS’14 | Meenakshi Engineering College | 3/9/2014 | 3rd prize |
42 | Jay dhwarak B V | 3rd prize | ||||
43 | Krishnan V | 3rd prize | ||||
44 | Vinusakthi T | Alstrut Assemblers/ MECHAHOLICS’14 | 3rd prize | |||
45 | Kamalahar T | 3rd prize | ||||
46 | Kashyap Nikhil M | Participated | ||||
47 | Mohammed zubair I | Participated | ||||
48 | Jay dhwarak B V | Indoor Foot Ball/ MECHAHOLICS’14 | Participated | |||
49 | Vijay G | Participated | ||||
50 | Rajkumar R | III / V | Paper Presentation/ ORBITCE 2K14 | SSN College of Engineering | 4/9/2014 | Presented |
51 | Rajkumar V | Symposium /Paradigm 2k14 | 5/9/2014 | Participated | ||
52 | Rajkumar V | III / V | Paper Presentation/ CRANKX 2K14 | SSN College of Engineering | 9/9/2014 | Presented |
53 | Philemon philip | Presented | ||||
54 | Arun K S | Workshop on Introduction to CFD/ CRANKX 2K14 | Participated | |||
55 | Arun kumar M | Participated | ||||
56 | Venkateshwaran S | II / III | Bottle Rocketrix/ CRANKX 2K14 | Participated | ||
57 | Harwin ramoj R | Participated | ||||
58 | Vignesh G | Participated | ||||
59 | Iyyappan E | Participated | ||||
60 | Akshay rahul B | Hover – X/ CRANKX 2K14 | Participated | |||
61 | Venkateshwaran S | Participated | ||||
62 | Ashik P | Participated | ||||
63 | Arvind kumar S | Participated | ||||
64 | Arjun prakash M | Participated | ||||
65 | Mohammed zubair I | IV / VII IV / VII | Project Exhibition/ CRANKX 2K14 | SSN College of Engineering | 9/9/2014 | Participated |
66 | Subramaniam C S H | Participated | ||||
67 | Sivamani K | Participated | ||||
68 | Naveen B | First place First place | ||||
69 | Arunkumar A V | |||||
70 | Yaswanth M | |||||
71 | Sastha kumar U | |||||
72 | Gurunathan G | Workshop on CFD/ CRANKX 2K14 | Participated | |||
73 | Sujay R | Participated | ||||
74 | Sastha kumar U | Paper Presentation/ CRANKX 2K14 | 2nd place | |||
75 | Yaswanth M | 2nd place | ||||
76 | Arunkumar A V | Paper Presentation/ CRANKX 2K14 | 2nd place | |||
77 | Naveen B | 2nd place | ||||
78 | Aravind kumar S | II/III | Auto-Quiz/ CRANKX 2K14 | SSN College of Engineering | 9/9/2014 | Participated |
79 | Harwin ramoj R | II/III | Introduction to FEM using ABAQUS/ CRANKX 2K14 | SSN College of Engineering | 9/9/2014 | Participated |
80 | Mohan raj S | III / V | Connections/ DRESTEIN ’14 | Saveetha Engineering College | 10/9/2014 | Participated |
81 | Lokesh M T | The Mechanic/ DRESTEIN ’14 | Participated | |||
82 | Narayanan P | Participated | ||||
83 | MOHAN RAJ S | Beat the clock/ DRESTEIN ’14 | Won 2nd prize | |||
84 | Kishore kanna P | Won 2nd prize | ||||
85 | Santhosh kumar P | Workshop on CNC Programming on EDGECAM/ DRESTEIN ’14 | Participated | |||
86 | Nagarajan M S | Participated | ||||
87 | Madan raj G | III / V | Saveetha Engineering College | 11/9/2014 | Participated | |
88 | Arun kumar M | Participated | ||||
89 | Jawahar P | Participated | ||||
90 | Arockiyaraj J | II / III | Techno Management Fest/ AARUUSH ’14 | SRM University | 10/9/ 2014 to 13/09/ 2014 | Participated |
91 | Arunkumar S | Participated | ||||
92 | Venkateshwaran S | Participated | ||||
93 | Harwin ramoj R | Participated | ||||
94 | Vignesh G | Participated | ||||
95 | Iyyappan E | Participated | ||||
96 | Abishek K B | Participated | ||||
97 | Akshay rahul B | Participated | ||||
98 | Ashik P | Participated | ||||
99 | Arun K S | III/V | Automobile Training Program/ PRIGMA | SRM University,Chennai. | 12/09/2014 to 13/09/2014 | Participated |
100 | Daniel R | |||||
101 | Arun K S | III/V | Paper Presentation/ DANTRA 14 | Meenakshi Engineering College | 13/09/2014 | Participated |
102 | Arjunraj B | IV / VII | Workshop on Advancements in Plastic Material and Processing/ TEPIC ’14 |
CIPET | 12/9/2014 | Participated |
103 | Parithimalavan C K | Participated | ||||
104 | Arockia suthan S | Participated | ||||
105 | Arun balaji D | Participated | ||||
106 | Shylesh V G | II / III | Participated | |||
107 | Sathya narayanan S | Participated | ||||
108 | Bhuvaneswaran P | Participated | ||||
109 | Darren Rajasigamani S | II / III | Workshop on Advancemetns in plastic material and processing/ TEPIC ’14 |
CIPET | 12/9/2014 | Participated |
110 | Shahul hameed A M | Participated | ||||
111 | Manish mohan M | III / V | Tech Quiz and Mr.machinist/ EKALAIVA 2K14 | Velammal Institute of Technology,Chennai. | 20/09/ 2014 | Participated |
112 | Nanda kumar M | Participated | ||||
113 | Manish mohan M | III / V | CAD Modelling/ EKALAIVA 2K14 | 1st place | ||
114 | Nandakumar M | 1st place | ||||
115 | aravind kumar S | II/III | Workshop on Design,Simulation & Analysis of Commercial Bike/ Auto Factory’2014 |
College of Engineering,Guindy, Chennai. | 19/09/2014 To 21/09/2014 | Participated |
116 | Venkateshwaran S | II/III | Workshop on Design,Simulation & Analysis of Commercial Bike/ Auto Factory’2014 |
College of Engineering,Guindy, Chennai. | 19/09/2014 To 21/09/2014 | Participated |
117 | Gowtham kumar J | IV / VII | Workshop/ MXCEL’14 | Kongu Engineering College | 24/09/2014 | Participated |
Paper Presentation/ MXCEL’14 | 25/09/2014 | 1st place | ||||
118 | Naveen B | IV / VII | Paper Presentation/ MECHGUST ’14 | Chennai Institute of Technology | 26/09/2014 | 3rd place |
119 | Arunkumar A V | Presented | ||||
120 | Duraimurugan S | Presented | ||||
121 | Moorthy M | Presented | ||||
122 | Nanda kumar M | Presented | ||||
123 | Jaganathan C | Auto Quiz/ MECHGUST ’14 | Presented | |||
124 | Kamalakannan V | Auto Quiz/ MECHGUST ’14 | Presented | |||
125 | Sedhunivas | CAD Modeling/ MECHGUST ’14 | Presented | |||
126 | Poovarasan T | CAD Modeling, Auto Quiz & Paper Presentation/ MECHGUST ’14 |
Presented | |||
127 | Jason Daniel M | II/IV | Automobile Training Workshop | IIT,Chennai | 04/01/2015 To 06/01/2015 | |
Participated | ||||||
128 | Ganesh L | I/II | Essay Competition/ Computer Society of India | IEEE Computer Society , Chennai | Jan-15 | First Position |
129 | Arun K S | III/VI | Engine Assembly Workshop | Diagonal CADD, porur | 11/01/2015 | Participated |
130 | Jawahar P | III/VI | Engine Assembly Workshop | Diagonal CADD, porur | 24/01/2015 | Participated |
Paper Presentation/ Impacts | Panimalar engg college,Chennai. | 31/01/2015 | ||||
131 | Ramalingam P L | III/V | Conference/ Synergy | VIT, Chennai. | 23/01/2015 to 24/01/2015 | Participated |
132 | Rahul H A | II/IV | Workshop/ Cisco Network Design and Implementation | VIT,Chennai | 22/01/2015 to 23/01/2015 | Participated |
133 | Shangavi C | II/IV | Reverse engineering Workshop | IIT,Chennai | 28/01/2015 to 31-01-2015 | Participated |
134 | Krishna priya | II/IV | Welding and Sheet metal Workshop | IIT, Chennai | 28/01/2015 to 31/01/2015 | Participated |
135 | Sai Krishna | I/II | Workshop/ CRESTECH-2015 | B.S Abdur Rahman University | 20/01/2015, 28/01/2015, 29/01/2015, 30/01/2015, 31/01/2015 | Participated |
136 | Sai Krishna | I/II | RC Electric Event/ AGRONA-2015 | JEPPIAAR Institute of Technology | 24/01/2015 | Third position |
137 | Akshy Rahul B | II/IV | Welding and sheet metal Workshop | Kalasalingam university | 30/01/2015 to 31/01/2015 | Participated |
138 | Ashik P | Participated | ||||
139 | Bhuvaneshwarn P | Participated | ||||
140 | Harikrishnan S | Participated | ||||
141 | Balaanand R | III/VI | Manufacuring technology Workshop | First position | ||
142 | Daniel R | First position | ||||
143 | Baskaran K | First position | ||||
144 | K.s arun | First position | ||||
145 | Gokul D | II/IV | Automobile training Workshop | IISC, Bengaluru | 29/01/2015 to 31/01/2015 | Participated |
146 | Jason Daniel M | III/VI | National Entrepreneur Challenge/NEC -2014-15 | IIT, Bombay | 30.01.2015 to 31.01.2015 | Secured finalist position |
147 | Rajkumar V | III/VI | National Entrepreneur Challenge/NEC -2014-15 | IIT, Bombay | 30.01.2015 to 31.01.2015 | Participated |
146 | Yaswanth M | IV/VIII | Paper presentation/ CRESTECH-2015 (national level technical symposium) | B.S.Abdur Rahman University, Chennai. | 31.01.2015 | III Position |
14 | Bhuvaneshwaran P | II/IV | Workshop/ Icam-3d | Veltech University | 5/2/2015 | Participated |
148 | Jason Daniel M | III/V | National entrepreneur challenge (NEC-2014-15) | IIT, Bombay | 30.01.2015 to 31.01.2015 | Secured finalist position |
149 | Rajkumar V | IV/VII | National entrepreneur challenge (NEC -2014-15) | IIT, Bombay | 30.01.2015 to 31.01.2015 | Participated |
150 | Jason Daniel M | III/V | A National Level B-plan Competition/ BIZENCE’2015 | EDC,SIES GST,Nerul | 24/02/2015 | Participated |
151 | Rajkumar V | IV/VII | A National Level B-plan Competition/ BIZENCE’2015 | EDC,SIES GST,Nerul | 24/02/2015 | Participated |
152 | Mohan raj S | III/VI | Robowar /Symposium | MIT, Chennai | 20/02/2015 | Participated |
153 | Rajkumar V | Participated | ||||
154 | Saravanan K | Participated | ||||
155 | Naveen kumar T | Participated | ||||
156 | Nanadhakumar M | Participated | ||||
157 | Manish moan M | Participated | ||||
158 | Arun raja M | Participated | ||||
159 | Ajith kumar K | II/IV | Workshop/ RTIAUPLC | Global Institute of Engineering and Technology | 21/02/2015 | Presented |
160 | Guruvignesh raj R M | II/IV | Symposium/ EXPRO-2015 | MIT,Chennai | 21/02/2015 | Participated |
161 | Jason Daniel M | II/IV | Symposium/ Underwater technology (UT’15) | NIOT, Chennai | 23/02/2015 to 25/02/2015 | Presented a Poster titled “Control of wave power conversion system” |
162 | Harish A | I/II | Paper Presentation/ LBTTA-2015 | Annai Veilankanni’s College for Women | 26/02/2015 | Presented |
163 | Saravanan K | III/VI | Workshop/ Drone tech,Sensors & Internet of things (iot) | IIT,Chennai | 27/02/2015 | Presented |
164 | Rajkumar V | Presented | ||||
Presented | ||||||
165 | Muthumani G | III/VI | Workshop on ARDUINO/ FLIGHT’15 | MIT,chennai | 27/02/2015 to 28/02/215 | Presented |
166 | Aravind kumar S | II/IV | Workshop on jet/ FLIGHT’15 | MIT,chennai | 27/02/2015 to 28/02/2015 | Participated |
167 | Vaishnavkumar S | Participated | ||||
168 | Vineeth B | Participated | ||||
169 | Venkatesan S | Participated | ||||
170 | Jason Daniel M | Participated | ||||
171 | Harwin ramoj R | Participated | ||||
172 | Shahul hameed A.M | |||||
173 | Guruvignesh raj R M | II/IV | Workshop on Composite/ FLIGHT’15 | MIT,chennai | 27/02/2015 to 28/02/2015 | Participated Presented |
174 | Yaswanth M | IV/VIII | INGENIOUS’15 | Rajalakshmi Engineering College | 28/02/2015 | First position |
175 | Jason Daniel M | II / III | DHONI – 2015 | Anna University, Chennai | Mar-15 | Presented |
176 | Abishek K B | II / III | DHONI – 2015 | Mar-15 | Presented | |
177 | Akshay Rahul B | II / III | DHONI – 2015 | Mar-15 | Presented | |
178 | Obed josephfabian A | II / III | DHONI – 2015 | Mar-15 | Presented | |
179 | Naveen kumar T | III / V | DHONI – 2015 | Mar-15 | Presented | |
180 | Philemon P | III / V | DHONI – 2015 | Mar-15 | Presented | |
181 | Bala Anand R | III / V | DHONI – 2015 | Mar-15 | Presented | |
182 | Arul danie J | III / V | DHONI – 2015 | Mar-15 | Presented | |
183 | Vignesh M | III / V | DHONI – 2015 | Mar-15 | Presented | |
184 | Mohammed yousuf M I | III / V | DHONI – 2015 | Mar-15 | Presented | |
185 | Jason Daniel M | III/V | Singapore Autonomous Under Water Vehicle Competition (SAUVC-2014-15) |
Singapore Polytechnic,Singapore | 06.03.2015 to 08.03.2015 | Participated |
186 | Arvind kumar S | III/V | Singapore Autonomous Under Water Vehicle Competition (SAUVC-2014-15) |
Singapore Autonomous Under Water Vehicle Competition | Singapore Polytechnic | 06.03.2015 to 08.03.2015 |
187 | Jai siva R | III/V | BLITZCRANK’15 | SKR engineering college | 6/3/2015 | Presented |
188 | Bhuvanesh G | III/V | BLITZCRANK’15 | SKR engineering college | 6/3/2015 | Presented |
189 | Harsh S | III/V | BLITZCRANK’15 | SKR engineering college | 6/3/2015 | Presented |
190 | Mohammed yusuf | III/V | BLITZCRANK’15 | SKR engineering college | 6/3/2015 | Presented |
191 | Nathan joel karunakaran | III/V | BLITZCRANK’15 | SKR engineering college | 6/3/2015 | Presented |
192 | Arutjothinadhan P | III/V | BLITZCRANK’15 | SKR engineering college | 6/3/2015 | Presented |
193 | Godwin Daniel J | III/V | BLITZCRANK’15 | SKR engineering college | 6/3/2015 | Participated |
194 | Ashik farhath M | III/V | BLITZCRANK’15 | SKR engineering college | 6/3/2015 | Participated |
195 | Naveen kumar T | III/V | BLITZCRANK’15 | SKR engineering college | 6/3/2015 | Participated |
196 | Vignesh V | III/V | BLITZCRANK’15 | SKR engineering college | 6/3/2015 | Participated |
197 | Arut jothi nathan | II/ IV
& III/VI |
Workshop on I.C Engines Mechanica-2015 | IIT, CHENNAI. | Year’2015 | Participated |
198 | Godwin daniel | Participated | ||||
199 | Ashik farhath | Participated | ||||
200 | Harsh S | Participated | ||||
201 | Bhuvanesh G | Participated | ||||
202 | Jaisiva R | Participated | ||||
203 | Logendran R | Participated | ||||
204 | Gokulakrishnan S | Participated | ||||
205 | Lokeshwar B | Participated | ||||
206 | Srinath saravanan | Participated | ||||
207 | Kiran Krishnan M | Participated | ||||
208 | Nejanthan Rishikumar S | Participated | ||||
209 | Vignesh S | Participated | ||||
210 | Isakki R | III/VI | Ideas Challenge/ Mechanica-2015 | IIT, chennai | 11/3/2015 | First position |
211 | Saikrishnan | I/II | Robotics/ Smechertz 2k15 | SakthiMariamman Engineering College | 14/03/2015 | Second place |
212 | Namachivayam R | I/II | Workshop on ARDUINO/ Electofocus-2015 | MIT, Chennai | 14/03/2015 | Participated |
Workshop on Robotics / Electofocus-2015 | 15/03/2015 | |||||
213 | Nandhakumar C R | III/VI | Paper Presentation/ Internatuional Conference on Contemporary engineering |
Ramanujar Engineering College, Coimbatore | 14/03/2015 to 15/03/2015 | Participated |
214 | Arun k s | III/VI | Paper Presentation/ Symposium Synergy 2015 | National institute of technology, Trichirapalli. | 13/03/2015 To 15/03/2015 | Participated |
215 | Daniel R | |||||
216 | Narendhar L | III/V | Robotics workshop | Government college of technology, coimbatore | 21/03/2015 | Third position |
217 | Seprin geno | III/V | ||||
218 | Siva prasad Y S | III/V | ||||
219 | Mani N S | III/V | ||||
220 | Manikandan P | III/V | ||||
221 | Nithinsekar B | III/VI | One day seminar on “entrepreneuship in
mechanical engineering” |
Chennai Institute of Technology | 23/03/2015 | Participated |
222 | Vignesh S | Participated | ||||
223 | Logendran R | Participated | ||||
224 | Gokulakrishnan S | Participated | ||||
225 | Nejanthan rishikumar S | Participated | ||||
226 | Praveenkumar N | Participated | ||||
227 | Sibeeswaran N | Participated | ||||
228 | Jawahar P | III/VI | Paper presentation/ Mech x torm 15 | Mammallan Institute of Technology, chennai. | 14/03/2015 | Participated |
229 | Logendran R | IV/VII | Engine assembly & disassembly Workshop | Diagonal cadd, porur, chennai. | 12/07/2015 | Participated |
230 | Jason Daniel M | II/IV | CFD using ansys fluent/ Short term course | AUFRG Institute for CAD/CAM, CEG, chennai | 29/05/2015 To 11/06/2015 | Completed |
231 | Rishi kumar | III/VI | Short film | Agni College of Technology | 25/03/2015 | Participated |
232 | Philemon P | III/VI | Paper Presentation/ ICFTET-2015 | PSNA College of Engineering | 7/04/2015, 8/04/2015 | Participated |
S.no | Year/Sem | Name of the Student | Name of the Event/ Title of the Program | Venu | Date | Participation / Award |
1. | Shagul hameed A M | III/VI | Automotive Sketching/ Hands on training by institute of industrial design |
Auto desk sketchbook pro, institute of industrial design, chennai. |
07/06/2015 | Successfully completed. |
2. | Jason Daniel M | III/VI | Enactus India National Competition | Enactusindia National Advisory Board | 21-07-2015 & 22-07-2015 |
Got cetrtificate in recognisation of his commitment |
3 | Saikrishna G | II/III | RC race/ TORO 2K15 | Loyala iCAM | 25/07/2015 | Third position |
TRACK-O-MANIA/ EMFISIS 2015 | KCG COLLEGE OF TECHNOLOGY,CHENNAI. | YEAR’2015 | 2ND POSITION | |||
4 | Logendran R | III/V | Casting workshop/ Amalgam | IIT,Chennai | Year’2015 | Participated |
5 | Naveen B | III/VI | Kaizen Robotics Program | IIT,madras | July-Aug’2015 | Successfully completed |
Ravi raja S | ||||||
Naveen kumar M | ||||||
6 | Arun K S | III/V | Mechanical CADD design & development /Workshop | Diagonal CADD, porur | 20/07/2014 | Participated |
7 | V.rajkumar Jason Daniel M Arjunprakash, Arun K S Aravindkumar S |
III/V | SAE BAJA virtual round of All Aerrain Vehicle | Chitkara university, patiala, punjab | 10/07/2015 & 11/07/2015 | Participated |
9 | Bhuvaneshwaran P | III/V | Workshop/ Horsepower-2015 | ICSA Seminar Hall | 1/8/2015 | Participated |
10 | Logendran R | III/V | Workshop/ Technovation 2015 | Coimbatore Institute of Technology | 26/08/2015 | Participated |
11 | Krishnaraj P | II/III | Workshop/ EUPRAXIA | SSN College of Engineering | 29/08/2015 | Participated |
12 | Saikrishna G | II/III | Line follower/ EPSILON 2K15 | Meenakshi Sundarajan Engineering College | 18/08/2015 | First position |
13 | Saikrishna G | II/III | I-quest/ EPSILON 2K15 | Meenakshi Sundarajan Engineering College | 18/08/2015 | Participated |
14 | Saikrishna G | II/III | PAPERIEZV/ EPSILON 2K15 | Meenakshi Sundarajan Engineering College | 18/08/2015 | Participated |
15 | Saikrishna G | II/III | RC racing/ EPSILON 2K15 | Meenakshi Sundarajan Engineering College | 18/08/2015 | Participated |
16 | Saikrishna G | II/III | Workshop/ EPSILON 2K15 | Meenakshi Sundarajan Engineering College | 18/08/2015 | Participated |
17 | Kannan D | II/III | Workshop/ YANTRA-15 | Meenakshi Sundarajan Engineering College | 19/08/2015 | Participated |
18 | Krishnaraj P | II/III | Workshop/ YANTRA-15 | Meenakshi Sundarajan Engineering College | 19/08/2015 | Participated |
19 | Harish A | II/III | Workshop/ YANTRA-15 | Meenakshi Sundarajan Engineering College | 19/08/2015 | Participated |
20 | Ganesh kumar S | II/III | Workshop/ YANTRA-15 | Meenakshi Sundarajan Engineering College | 19/08/2015 | Participated |
21 | Yugesh K | II/III | Workshop/ YANTRA-15 | Meenakshi Sundarajan Engineering College | 19/08/2015 | Participated |
22 | Manivannan R | II/III | Paper presentation/ YANTRA-15 | Meenakshi Sundarajan Engineering College | 19/08/2015 | Presented |
23 | Manivannan R | II/III | Lathe Art/ YANTRA-15 | Meenakshi Sundarajan Engineering College | 19/08/2015 | Participated |
24 | Ganesh L | II/III | Workshop/ YANTRA-15 | Meenakshi Sundarajan Engineering College | 19/08/2015 | Participated |
17 |
|
III/V | Paper presentation | Meenakshi sundarajan engineering college | 13/08/2014 | Participated |
25 | Srinath saravanan P | III/V | Paper Presentation/ MECHAMORPHIS-15 | KCG College of Technology | 22/08/2015 | Presented |
26 | Srinath saravanan P | III/V | Symposium/ THROTTLEZ-2015 | Dhanalakshmi College of Engineering | 24/08/2015 | Presented |
27 | Bhuvaneshwaran P | III/V | Paper Presentation/ THROTTLEZ-2015 | Dhanalakshmi College of Engineering | 24/08/2015 | Participated |
Mr.Manufacturer/ THROTTLEZ-2015 | ||||||
28 | Bhuvaneshwaran P | III/V | Symposium/ IGNITION | SVCE, Sriperambudur | 31/08/2015 | Participated |
29 | Shagul Hameed A M | III/V | Paper Presentation/ THROTTLEZ-2015 | Dhanalakshmi College of Engineering, Chennai | 24/08/2015 | Participated |
MECHQUESTO/ THROTTLEZ-2015 | ||||||
Aresto Momentum/ YANTRA’15 | Meenakshi Sundarajan Engineering College,Chennai | 19/08/2015 | ||||
One day Workshop on Automobile engg/ YANTRA’15 | ||||||
Paper Presentation/ Mechamorphis’15V2.0 | K C G College of technology,Chennai | 22/08/2015 | ||||
30 | Srinath saravanan P | III/V | Symposium/ IGNITION | SVCE, Sriperambudur | 31/08/2015 | Participated |
31 | Sai bharath R | II/III | Workshop/ ENGINES-2015 | Sathyabhama University | 3/09/2015, 04/09/2015 | Participated |
32 | Godwin joshua G | II/III | Workshop/ CRANK X | SSN College of Engineering | 4/9/2015 | Participated |
33 | Jaya prakash L | II/III | Workshop/ CRANK X | SSN College of Engineering | 4/9/2015 | Participated |
34 | Gnana prakash K | II/III | Workshop/ CRANK X | SSN College of Engineering | 4/9/2015 | Participated |
35 | Namachivayam R | II/III | Workshop/ CRANK X | SSN College of Engineering | 4/9/2015 | Participated |
36 | Siva kumar R | II/III | Workshop/ IWA | ICSA Seminar Hall | 5/9/2015 | Participated |
37 | Srinath D | II/III | Workshop/ IWA | ICSA Seminar Hall | 5/9/2015 | Participated |
38 | Veeravan R | II/III | Workshop/ IWA | ICSA Seminar Hall | 5/9/2015 | Participated |
39 | Vignesh P U | II/III | Workshop/ IWA | ICSA Seminar Hall | 5/9/2015 | Participated |
40 | Jayakumar S | II/III | Workshop/ IWA | ICSA Seminar Hall | 5/9/2015 | Participated |
41 | Ramalingam P L | III/V | Conference/ MECXTREME 2K15 | Loyola Institute of Technology | 11/9/2015 | Second Position |
42 | Ramalingam P L | III/V | Conference./ ICTEEM | Hotel Chennai Gateway | 27/09/2015 | Presented |
43 | Ramalingam P L | III/V | Paper Presentation/ MECH MANIAX 2015 | SMK Fomra Institute of Technology | 29/09/2015 | Third Position |
44 | Arun K S | IV/VII | Workshop/ Smart Materials and Sensory Devices | College Of Engineering, Guindy | 26/09/2015 | Participated |
45 | Ramalingam P L | III/V | Paper Presentation/ SPARK 2015 | Madras Institute Of Technology | 10/10/2015 | Second Position |
46 | Philemon M | IV/VII | All india Design Competition for Engineering Students/Institution of Engineers |
The Instituttion Of Engineers (Dharwad) | 10.10.2015 to 11.10.2015 | Silver Medal |
47 | Arun K S Bala anand R Bhuvaneswaran P Gerard amalan F S Neeraj kumar M Bharath kumar R Gokul D Dhayanithi T Sathyanarayan S Dhanush C |
IV/VII & III/V |
EFFICYCLE-2015 | Lovely Professional University (LPU) , Jalandhar | 15/11/2015 to 18/11/2015 | Participated |
48 | Jason Daniel M Raviraja S Bhuvaneshwaran P Keerthivasan S Rohit M Prabhu M Naveein E Naveen G Om prakash R Harwin ramoj R Rajkumar V Arvind kuumar S |
III/VI | RC Sumo Robot Competition/ 23rd Singapore Robotic Games’2016 |
Tay Eng Soon Convention Centre, Singapore | 27.01.2016 to 28.01.2016 | Participated |
49 | Hariharan S | II/IV | DRAFT ZONE/ MC BLAZE 2K16 | Alpha College Of Engineering | 20/02/2016 | Participated |
50 | Jagadeesh R | II/IV | DRAFT ZONE/ MC BLAZE 2K16 | Alpha College Of Engineering | 20/02/2016 | Participated |
51 | Jagadeesh R | II/IV | MECHANIST/ MC BLAZE 2K16 | Alpha College Of Engineering | 20/02/2016 | Participated |
52 | Sai Bharath R | II/IV | Workshop/ KURUSHETRA-2016 | Anna University, Chennai | 17/02/2016, 18/02/2016 | Participated |
53 | Rakesh N | II/IV | Workshop/ KURUSHETRA-2016 | Anna University, Chennai | 17/02/2016, 18/02/2016 | Participated |
54 | Namachivayam R | II/IV | Workshop/ KURUSHETRA-2016 | Anna University, Chennai | 17/02/2016, 18/02/2016 | Participated |
55 | Jason Daniel M | III/VI | Workshop/ KURUSHETRA-2016 | Anna University, Chennai | 19/02/2016 to 21/02/2016 | Participated |
56 | Ramalingan P L | III/VI | Paper Presentation/ MECHNIFICENT 2K16 | P.B College Of Engineering,Chennai | 19/02/2016 | First Position |
57 | Naveein E | III/VI | Paper Presentation/ MECHNIFICENT 2K16 | P.B College Of Engineering,Chennai | 19/02/2016 | Second Position |
58 | Hari Babu S | III/VI | Paper Presentation/ MECHNIFICENT 2K16 | P.B College Of Engineering,Chennai | 19/02/2016 | Participated |
59 | Prabhu M | III/VI | Paper Presentation/ MECHNIFICENT 2K16 | P.B College Of Engineering,Chennai | 19/02/2016 | Participated |
60 | Ramalingam P L | III/VI | Paper Presentation/ STEER | SSN College Of Engineering | 25/02/2016 to 26/02/2016 | First Position |
61 | Manivannan R | II/IV | Auto Quiz/ MCADROID 16 | SRM Easwari Engineering College | MARCH 2016 | Presented |
62 | Manivannan R | II/IV | Paper Presentation/ MCADROID 16 | SRM Easwari Engineering College | MARCH 2016 | Presented |
63 | Lafir Malim F | II/IV | Paper Presentation/ MCADROID 16 | SRM Easwari Engineering College | MARCH 2016 | Presented |
64 | Bhuvaneshwaran P | III/VI | Paper Presentation/ MCADROID 16 | SRM Easwari Engineering College | MARCH 2016 | Second Prize |
Technical Quiz/ Confluence-2016 | B.S.Abdur Rahman University,Chennai | 17/03/2016 | Second Prize | |||
CAD Modeling/ Confluence-2016 | ||||||
65 | Mohan Raj.S | VII /IV | Aero Design Challenge 2016/ FALCONZ | Hindustan Institute Of Science And Technology | 17-19 MARCH 2016 | Design Award |
66 | M.Arjun Prakash | VII /IV | Aero Design Challenge 2016/ FALCONZ | Hindustan Institute Of Science And Technology | 17-19 MARCH 2016 | Design Award |
67 | Rajkumar.V | VII /IV | Aero Design Challenge 2016/ FALCONZ | Hindustan Institute Of Science And Technology | 17-19 MARCH 2016 | Design Award |
68 | P. Ramalingam Rathiesh. G.B Naveein. E Prakash. M |
III/VI | Institution Of Engineers | The Instituttion Of Engineers (Aeri-Hosur) | 03.03.2016 to 04.03.2016 | Best Project |
69 | Bala Anand. R Arun . K.S Baskaran. K Daniel.R |
VI/VIII | Institution Of Engineers | The Instituttion Of Engineers (Aeri-Hosur) | 03.03.2016 to 04.03.2016 | Best Project |
70 | Gokula Krishnan.S Venkatesan.J Vignesh.R Logendran.R Vignesh.S Hari Krishnan.S Ramprasad.S Ajith.V Aravind.S Sounder.P Akash.S Mugilan.A Harish.A Veeramani Logeswaran |
III/VI & II/IV |
ECO-KART-2016 | Bml Munjal University (Haryana) | 10/03/2016 to 13/03/2016 | Best Captain |
71 | Naveen B | III/VI | UAV Flight Control W/S/ FLIGHT’16 | Madras Institute Of Technology | 12/03/2016 | Participated |
72 | Philemon P Rajkumar V Arjun Prakash M Jason Daniel M Mohan Raj S Nanda Kumar M Sathya Narayanan S Harwin Ramoj R Naveeth Imran N Dhanush C |
IV/VIII & III/VI |
Aero Modelling-2016 | Hindustan University (Hits) | 16.03.2016 To 19.03.2016 | Best Design Award |
10 | Gokula Krishnan S Venkatesan J Vignesh R Logendran R Vignesh S Hari Krishnan S Ramprasad S Ajith V Aravind S Sounder P Akash S Mugilan A Harish A Veeramani logeswaran |
IV/VIII & III/VI |
ECO-KART-2016 | BML Munjal University (Haryana) | 10/03/2016 to 13/03/2016 | Best Captain |
73 | Ninaichippu R | III/VI | Paper Presentation/ ORCUS 2KX6 | Sri Venkateshwara Institute Of Science & Technology | 24/03/2016 | First Place |
74 | Ninaichippu R | III/VI | Paper Presentation/ Grand Challenges For Engineering By EEE Department |
Agni College Of Technology,Chennai | 06/04/2016 | Secured Second Position |
S.no | Batch | Year | Sem | Name | Amount |
1 | 2010-14 | II | IV | MALLU VIJAY BHARAV REDDY | 25000 |
2 | II | IV | AROKIA RAJ P | 15000 | |
3 | II | IV | ASWIN KUMAR M. | 10000 | |
4 | II | IV | GOKULA KRISHNAN R. | 10000 | |
5 | III | VI | MALLU VIJAY BHARAV REDDY | 25000 | |
6 | III | VI | ARUN RAJA B. | 15000 | |
7 | III | VI | GOKULA KRISHNAN R. | 10000 | |
8 | III | VI | SANJAY RAJA S. | 10000 | |
9 | I | I | MALLU VIJAY BHARAV REDDY | 25000 | |
10 | I | I | JAYANTHAN V.S. | 15000 | |
11 | I | I | ASWIN KUMAR M. | 10000 | |
12 | I | II | MALLU VIJAY BHARAV REDDY | 25000 | |
13 | I | II | JAYANTHAN V.S. | 15000 | |
14 | I | II | ASWIN KUMAR M. | 10000 | |
15 | 2011-15 | I | II | DEEPAK CHANDAR M. | 25000 |
16 | I | II | KRISHNAN V | 25000 | |
17 | I | II | AROCKIA SUTHAN S | 15000 | |
18 | I | II | RAMALINGAM P | 10000 | |
19 | I | II | GURUNATHAN G. | 10000 | |
20 | II | III | AROCKIA SUTHAN S | 25000 | |
21 | II | III | RAMALINGAM P | 15000 | |
22 | II | III | GURUNATHAN G. | 10000 | |
23 | 2014-18 | I | II | S.RAJASEKAR | 25000 |
24 | I | II | SAJAN JAIMON | 25000 | |
25 | I | II | F.LAFIR MALIM | 15000 | |
26 | I | II | S.SURENDARBABU | 10000 | |
27 | II | IV | G.DHANASEKAR | 25000 | |
28 | II | IV | K.AJITHKUMAR | 15000 | |
29 | II | IV | A.LOGESHKUMAR | 10000 | |
30 | III | VI | K.S.ARUN | 25000 | |
31 | III | VI | A.M.THAMBIRAJAN | 15000 | |
32 | III | VI | K.BASKARAN | 10000 | |
33 | 2015-19 | II | III | REVANTHKUMAR S. | 25000 |
34 | II | III | F.LAFIR MALIM | 15000 | |
35 | II | III | S.RAJASEKAR | 10000 | |
36 | II | III | SIVAPRASAD | 10000 | |
37 | II | III | S.SURENDARBABU | 10000 | |
38 | III | V | K.AJITHKUMAR | 25000 | |
39 | III | V | A.LOGESHKUMAR | 25000 | |
40 | III | V | VASANTHARAJ T. | 25000 | |
41 | III | V | GURUVIGNESHRAJ R.M. | 15000 | |
42 | III | V | SAI LOKESH S. | 10000 | |
43 | IV | VII | BALA ANAND R. | 25000 | |
44 | IV | VII | ARUN K.S. | 15000 | |
45 | IV | VII | ARUN KUMAR M. | 15000 | |
46 | IV | VII | BIBIN S. | 15000 | |
47 | IV | VII | RAMKUMAR K.T. | 10000 | |
48 | I | I | MUTHUKUMAR V | 25000 | |
49 | I | I | MANICKAM V. | 15000 | |
50 | I | I | CHOKKANATHAN R. | 10000 |
S.no | Name of the Faculty | Title of Event | Date | Speaker |
1 | Mr. Amos Gamaleal David
Mr. K. Raja Karthikeyan Mr. S. Santhosh Kumar Mr. B. Prabhu Mr. V. Sharun |
Thermal Degradation Study Of Multilayer Composite For Aircraft Interiors | 24.06.2020 | Dr. Hussain Najmi
Research Engineer ISAE-ENSMA, FRANCE |
2 | Mr. G. Gnanakumar
Mr. C. Parthasarathy Mr. T. Rajendiran Mr. P. Arthis |
Smart Material | 15.07.2020 | Dr.A.Rajadurai,
Professor (Emeritus), Former Dean (MIT), Department Of Production Technology, MIT Campus, Anna University, Chromepet, Chennai |
3 | Mr. S. Louies Praveen
Mr. V. Vinod Kumar Mr. G. Senthil Kumar Mr. M. Senthil Prabhu |
Product Innovation And Design | 29.12.2020 | Mr. Shyama Charan Shukla
R & D Manager TAPCO Pneumatics Pvt Ltd Chennai |
Name of the Faculty | Designation | Name of the Programme | Sponsored / Organized by | Duration(Days)/ Date |
Mr.S.Manoharan | Assistant Professor | Heat And Mass Transfer | College Of Engineering, Guindy | 10.12.2013 To 17.12.2013 |
Mr.A.Senthilathiban | Assistant Professor | Heat And Mass Transfer | College Of Engineering, Guindy | 10.12.2013 To 17.12.2013 |
Mr.D.Joseph Manuel | Assistant Professor | Strength Of Materials | Adhiparasakthi Engineering College , Melmaruvathur | 16.12.2013 To 24.12.2013 |
Mr.N.Kandavel | Assistant Professor | Unconventional Machining Process | Anna University MIT Campus | 04.12.2013 To 11.12.2013 |
Mr.D.Suresh | Assistant Professor | Unconventional Machining Process | Anna University MIT Campus | 04.12.2013 To 11.12.2013 |
Mr.H.Manikandan | Assistant Professor | Design Of Machine Elements | Vel Tech Multi Tech Dr. Rangarajan Dr. Sakunthala Engineering College |
05.06.2013 To 13.06.2013 |
Mr.S.Louies Praveen | Assistant Professor | Design Of Machine Elements | Vel Tech Multi Tech Dr. Rangarajan Dr. Sakunthala Engineering College |
05.06.2013 To 13.06.2013 |
Mr.V.Vinodkumar | Assistant Professor | Engineering Mechanics | University College Of Engineering Villupuram | 09.12.2013 To 15.12.2013 |
Mr.S.Shanmugasundaram | Assistant Professor | Thermal Engineering | Velammal Engineering College Chennai | 17.06.2013 To 23.06.2013 |
Name of the Faculty | Designation | Name of the Programme | Sponsored / Organized by | Duration(Days)/ Date |
Mr.H.Manikandan | Assistant Professor | Finite Element Analysis | Madras Institute Of Technology | 04.12.2014 To 10.12.2014 |
Mr.D.Joseph Manuel | Assistant Professor | Finite Element Analysis | Madras Institute Of Technology | 04.12.2014 To 10.12.2014 |
Mr.C.Parthasarthy | Assistant Professor | Automobile Engineering | Madras Institute Of Technology | 01.01.2015 To 07.01.2015 |
Mr.G.Senthilkumar | Assistant Professor | Automobile Engineering | Madras Institute Of Technology | 01.01.2015 To 07.01.2015 |
Mr.Amos Gamaleal David | Assistant Professor | Kinematics Of Machinery | Rajalakshmi Engg College Chennai | 09.12.2014 To 16.12.2014 |
Mr.B.Bradley Bright | Assistant Professor | Engineering Mechanics | University College Of Engineering Dindigul | 12.12.2014 To 18.12.2014 |
Mr.G. Gnanakumar | Assistant Professor | Manufacturing Technology-II | College Of Engineering Guindy | 08.12.2014 To 14.12.2014 |
Mr.K.Rajakarthikeyan | Assistant Professor | Manufacturing Technology-II | College Of Engineering Guindy | 08.12.2014 To 14.12.2014 |
Mr.S. Maharajan | Assistant Professor | Dynamics Of Machinery | College Of Engineering, Guindy | 16.06.2014 To 22.06.2014 |
Mr.S.Louies Praveen | Assistant Professor | Dynamics Of Machinery | College Of Engineering, Guindy | 16.06.2014 To 22.06.2014 |
Mr.C.Velmurugan | Assistant Professor | Applied Hydraulics And Pneumatics | University College Of Engineering Ariyalur | 23.06.2014 To 29.06.2014 |
Mr.S.Manoharan | Assistant Professor | Applied Hydraulics And Pneumatics | University College Of Engineering Ariyalur | 23.06.2014 To 29.06.2014 |
Mr.S.Santhoshkumar | Assistant Professor | Fluid Mechanics And Machinery | Anand Institute Of Higher Technology Chennai | 23.06.2014 To 29.06.2014 |
Mr.S. Malligarjunan | Associate Professor | Strength Of Materials | Saranathan College Of Engineering Trichy | 16.06.2014 To 22.06.2014 |
Mr.P. Selvaraju | Associate Professor | Strength Of Materials | Saranathan College Of Engineering Trichy | 16.06.2014 To 22.06.2014 |
Mr.K.Balasubramanian | Associate Professor | Engineering Thermodynamics | Velammal Institute Of Technology Chennai | 17.06.2014 To 24.06.2014 |
Mr.S.Shanmugasundaram | Assistant Professor | Engineering Thermodynamics | Velammal Institute Of Technology Chennai | 17.06.2014 To 24.06.2014 |
Name of the Faculty | Designation | Name of the Programme | Sponsored / Organized by | Duration(Days)/ Date |
Mr.R. Naveen Kumar | Assistant Professor | Thermal Engineering | Panimalar Institute Of Technology | 04.01.2016 To 11.01.2016 |
Mr.T. Rajendiran | Assistant Professor | Thermal Engineering | Panimalar Institute Of Technology | 04.01.2016 To 11.01.2016 |
Mr.K. Ashok Kumar | Assistant Professor | Thermal Engineering | Panimalar Institute Of Technology | 04.01.2016 To 11.01.2016 |
Mr.T.G.Sakthivel | Associate Professor | Thermal Engineering | Panimalar Institute Of Technology | 04.01.2016 To 11.01.2016 |
Mr.K. Elavarasan | Assistant Professor | Thermal Engineering | Panimalar Institute Of Technology | 04.01.2016 To 11.01.2016 |
Mr.G.Gnanakumar | Assistant Professor | Thermal Engineering | Panimalar Institute Of Technology | 04.01.2016 To 11.01.2016 |
Mr.P.Selvaraju | Associate Professor | Finite Element Analysis | St.Joseph Institute Of Technology | 04.01.2016 To 10.01.2016 |
Mr.S.Santhoshkumar | Assistant Professor | Engineering Mechanics | University College Of Engineering, Dindigul | 14.12.2015 To 20.12.2015 |
Mr.B.Prabhu | Assistant Professor | Engineering Graphics | Aalim Muhammed Salegh Coll Of Engg Chennai | 29.06.2015 To 05.07.2015 |
Mr.V.Sharun | Assistant Professor | Engineering Graphics | Aalim Muhammed Salegh Coll Of Engg Chennai | 29.06.2015 To 05.07.2015 |
Mr.S.Malligarjunan | Associate Professor | Computer Aided Design | Vel Tech Multi Tech Dr. Rangarajan Dr. Sakunthala Engineering College |
10.06.2015 To 18.06.2015 |
Mr.D. Gopinath | Assistant Professor | Engineering Thermodynamics | Panimalar Engineering College | 25.05.2015 To 02.06.2015 |
Mr.V.Vinodkumar | Assistant Professor | Engineering Thermodynamics | Panimalar Engineering College | 25.05.2015 To 02.06.2015 |
Mr.M.Udhayakumar | Assistant Professor | Engineering Thermodynamics | Panimalar Engineering College | 25.05.2015 To 02.06.2015 |
Mr.K. Rajakarthikeyan | Assistant Professor | Advanced Manufacturing Process For Automobiles | Anna University, BIT Campus,Trichy | 20.05.2015 To 02.06.2015 |
Assistant Professor | Thermal Engineering | Panimalar Institute Of Technology | 04.01.2016 To 11.01.2016 | |
Mr.R.Vijayakumar | Assistant Professor | Computer Aided Product Design | SSN College Of Engineering | 15.06.2015 To 27.06.2015 |
Mr.B.Dhanasakkaravarthi | Assistant Professor | Computer Aided Product Design | SSN College Of Engineering | 15.06.2015 To 27.06.2015 |
S.No | Name of the Faculty | Designation | Name of the Programme | Sponsored / Organized by | Duration(Days)/ Date |
1. | Mr.S.Louies Praveen | Assistant Professor | Engineering Materials And Metallurgy | Madras Institute Of Technology | 05-12-16 To 13-12-16 |
2. | Mr.C.Parthasarthy | Assistant Professor | Kinematics Of Machinery | Sri Sairam Institute Of Technology | 15.12.16 To 22.12.16 |
S.no | Students Name | Year | Event | Name of the Events | Duration |
1 | RAVEENDARVADIVEL | III YEAR | WORKSHOP | ANDROID APP DEVELOPMENT IN TAMIL | 6.11.2020 |
2 | RAVEENDARVADIVEL | III YEAR | WEBINAR | ROBATICS AND AUTOMATION | 14.8.2020 |
3 | NARENDAR K | IV YEAR | WORKSHOP | PYTHON FOR AI PROGRAMING | 24.11.2020 |
4 | KRISHNA KUMAR. M | IV YEAR | WORKSHOP | GOOGLE COLAB MACHINING LEARNING LAB | 4.1.2021 |
5 | KRISHNA KUMAR. M | IV YEAR | WORKSHOP | BASIC MACNINE LEARNING | 6.12.2020 |
6 | KRISHNA KUMAR. M | IV YEAR | WORKSHOP | PYTHONMACHINE LEARNING | 3.12.2020 |
7 | RAVEENDARVADIVEL | III YEAR | WORKSHOP | MACHINE LEARNING: UN SUPERVISED LEARNING | 15.12.2020 |
8 | KRISHNA KUMAR. M | IV YEAR | INTERNSHIP | INTERNSHIP: PETROLIUM CHEMICAL ENGINEERING | 16.12.2020-17.12.2020 |
9 | RAVEENDARVADIVEL | III YEAR | WORKSHOP | ECTS CREDITED ONLINE COURSES | 16.8.2020 |
10 | RAVEENDARVADIVEL | III YEAR | WORKSHOP | FULL STACK WEB DEVELOPMENT PROGRAM | 18.12.2020 |
11 | NARENDAR K | IV YEAR | WEBINAR | FULL STACK WEB DEVELOPMENT PROGRAM | 18.12.2020 |
12 | AKASH. V | IV YEAR | WEBINAR | FULL STACK WEB DEVELOPMENT PROGRAM | 18.12.2020 |
13 | KRISHNA KUMAR. M | IV YEAR | WORKSHOP | WORKSHOP ON C++: TRENDS AND TECHNOLOGY | 5.1.2021 |
14 | KRISHNA KUMAR. M | IV YEAR | WORKSHOP | WORKSHOP ON 3D PRINTING | 27.1.2021 |
15 | DAVID GIBS A | III YEAR | WORKSHOP | STACKATHON 3.0 | 17.9.2020-21.9.2020 |
16 | 172 Students | IV Year | Webinar | Thermal Degradation Study Of Multilayer Composite For Aircraft Interiors | 24.06.2020 |
17 | 110 Students | III Year | Webinar | Entrepreneurial Avenues And Opportunities: A Way Forward | 27.06.2020 |
18 | 165 Students | IV Year | Webinar | Opportunities For Mechanical Engineering Student In Aeronautical Industry | 30.06.2020 |
19 | 98 Students | III Year | Webinar | Challenges For Mechanical Engineer | 01.07.2020 |
20 | 60 Students | II Year | Webinar | Guideway To Career | 02.07.2020 |
21 | 95 Students | III Year | Webinar | Opportunities For Mechanical Engineers In Current Scenario | 03.07.2020 |
22 | 45 Students | IV Year | Guest Lecture | Smart Material | 15.07.2020 |
23 | 155 Students | IV Year | Guest Lecture | Challenges And Opportunities In NDT Sector | 01.09.2020 |
24 | 55 Students | II Year | Workshop | Effective Communication | 14.10.2020
16.10.2020 17.10.2020 |
25 | 45 Students | III Year | Guest Lecture | Energy Conservation And Energy Efficiency | 17.10.2020 |
26 | 78 Students | III Year | Guest Lecture | How To Become An Entrepreneur And Awareness On Start-Up | 11.11.2020 |
27 | 120 Students | IV Year | Webinar | Product Innovation And Design | 29.12.2020 |
S.no | Name | Reg No | Rank | CGPA |
1. | Naveen Kumar S | 211517114138 | 25 | 8.83 |
S.no | Date | Staff Name | Title of the Work | Institution / Organization | Achievements / Awards | Photos |
1 | 2019-2020 | Dr.A.Baskar | NPTEL | IIT MADRAS | NPTEL Motivated Learner Award | |
2 | 2019-2020 | Mr.Amos Gamaleal David | NPTEL | IIT MADRAS | NPTEL Motivated Learner Award | |
3 | 2019-2020 | Mr.Amos Gamaleal David | AUTOCAD | AUTODESK | Professional Excellence Award | |
4 | 2019-2020 | Mr.G.Gnanakumar | NPTEL | IIT KANPUR | NPTEL – ELITE Manufacturing of Composites | |
5 | 2019-2020 | Mr.G.Gnanakumar | NPTEL | IIT KARAGPUR | NPTEL-ELITE+GOLD Educational Leadership |
S.no | Category | Title of the Event | Date | Speaker | Coordinator |
1 | Webinar | Thermal Degradation Study Of Multilayer Composite For Aircraft Interiors | 24.06.2020 | Dr. Hussain Najmi
Research Engineer ISAE-ENSMA, FRANCE |
Amos Gamaleal David |
2 | Webinar | Entrepreneurial Avenues And Opportunities: A Way Forward | 27.06.2020 | Dr. S. Marceline
Head And Associate Professor, Department Of Public Administration, Anna Adarsh College For Women |
Mr. S. Louies Praveen |
3 | Webinar | Opportunities For Mechanical Engineering Student In Aeronautical Industry | 30.06.2020 | Veteran Wing Commander M. Jeyakumar
Chairman And Managing Director NRoot Technologies Pvt Ltd Thanjavur |
Mr. G. Gnanakumar |
4 | Webinar | Challenges For Mechanical Engineer | 01.07.2020 | Dr. V. Jayakumar,
Chairman, Department Of Mechanical Engineering, Amrita Vishwa Vidyapeetham, Chennai |
Dr. R. Murugan |
5 | Webinar | Guideway To Career | 02.07.2020 | Lt. M. Yashwanth
Indian Navy |
Amos Gamaleal David |
6 | Webinar | Opportunities For Mechanical Engineers In Current Scenario | 03.07.2020 | Mr. N. Lakshmi Narasimhan,
General Manager – HR. Brakes India Pvt. Ltd, Padi, Chennai |
Mr. G. Gnanakumar |
7 | Webinar | Smart Material | 15.07.2020 | Dr.A.Rajadurai,
Professor (Emeritus), Former Dean (MIT), Department Of Production Technology, MIT Campus, Anna University, Chromepet, Chennai |
Mr. G. Gnanakumar |
8 | Guest Lecture | Challenges And Opportunities In NDT Sector | 01.09.2020 | Mr.R.Nirmal.
Operation Manager, IEQS Group (NDT Training Institute), Chennai |
Mr. G. Gnanakumar |
9 | Workshop | Effective Communication | 14.10.2020
16.10.2020 17.10.2020 |
Mr. Subhadip, Infosys
Mr. Vasanth, Daimler |
Amos Gamaleal David |
10 | Guest Lecture | Energy Conservation And Energy Efficiency | 17.10.2020 | Mr.D.Rathinasabapathy.,
External Faculty – PCRA |
Dr. N. Nithyanandan |
11 | Guest Lecture | How To Become An Entrepreneur And Awareness On Start-Up | 11.11.2020 | Mr. L S Bhadrinarayanan
Specialist In Nuclear Power Safety |
Amos Gamaleal David |
12 | Webinar | Product Innovation And Design | 29.12.2020 | Mr. Shyama Charan Shukla
R & D Manager TAPCO Pneumatics Pvt Ltd Chennai |
Amos Gamaleal David |
Name | Designation | Year |
Dr.I.PAUL THEOPHILUS RAJKUMAR | Professor | 2014-15 |
Mr. B.Dhanasakkaravarthi | Assistant Professor G-I | 2013-14 |
Mr.K.BALASUBRAMANIAN | Associate Professor | 2012-13 |
Name | Subject | Amount |
Dr.N.NITHYAANANDAN | UCM | 2000 |
Dr.I.PAUL THEOPHILUS RAJKUMAR | MT-II | 2000 |
K.BALASUBRAMANIAN | GDJP&UCM | 2000 |
B.DHANASAKKARAVARTHI | UCM | 2000 |
Mr.S.Manoharan | AE | 2000 |
Mr.C.Parthasarathy | EMM | 2000 |
Mr.K.Raja Karthikeyan | MT-II | 2000 |
Mr.S.Louies Praveen | MT-II | 2000 |
Mr.C.Vel Murugan | MT-II | 2000 |
Mr.Amos Gamaleal David | EMM | 2000 |
Mr.P.Selvaraju | EMM | 2000 |
Mr.C.Parthasarathy | EMM | 2000 |
Mr.V.Sharun | BCM | 2000 |
Name | Subject | Amount |
Mr.S.Malligarjunan | EM | 2000 |
Mr.G.Senthil Kumar | NE | 2000 |
B.DHANASAKKARAVARTHI | DTS | 2000 |
Mr.S.Manoharan | HYDRAULICS | 2000 |
Mr.S.Shanmugasundaram | HMT | 2000 |
Mr.H.Manikanadan | CIM | 2000 |
Mr.D.Joseph Manuel | EG | 2000 |
Mr.S.Louies Praveen | EMM | 2000 |
S.No | Name | Subject | Amount |
1 | Dr.N.NITHYAANANDAN | UCM | 5000 |
2 | K.BALASUBRAMANIAN | PPE | 5000 |
3 | Mr.K.Raja Karthikeyan | POM | 5000 |
4 | Mr.V.Vinod Kumar | BCM | 5000 |
Name | Subject | Amount |
Dr.N.NITHYAANANDAN | EMM | 2000 |
Mr.N.KANDAVEL | HYDRAULICS | 2000 |
Mr.G.Senthil Kumar | FMM | 2000 |
B.DHANASAKKARAVARTHI | UCM | 2000 |
Mr.S.Manoharan | EVS | 2000 |
Mr.H.Manikanadan | MT-I | 2000 |
Mr.A.Senthilathiban | EG | 2000 |
K.BALASUBRAMANIAN | GDJP | 2000 |
Mr.D.Anin Vincely | EG | 2000 |
Mr.V.Vinod Kumar | EG | 2000 |
S.No | Name | Subject | Amount |
1 | Dr.N.NITHYAANANDAN | BCM | 5000 |
2 | Mr.D.BALAJI | EG | 5000 |
S.No | Name | Subject | Amount |
1 | Mr.K.BABU | BCM | 2000 |
Academic Year |
Organized Date | Resource Person | Coordinator | No. of Participants | Prize/Award |
2016-2017 | 25.02.2017 | Dr.R.Murugan Dr.T.P.Suresh |
S.Manoharan | 04 | 1st Price Cash Award of Rs.1000 2 nd Price Cash Award of Rs.750 |
No. | Student Name | Student College | Project Title | Amount |
1 | Rahul Shivakumar | Vellammal Engineering college | Weed Remover | Rs.1000 |
2 | M.Suresh
R.Vinothkumar S.P.Deepak Kumar |
SRM Easwari Engineering College | Sensor Helmet without Key and alcohol inspector | Rs.750 |
No. | Student Name | Student College | Project Title | Amount |
1 | Rahul Shivakumar | Vellammal Engineering college | Weed Remover | Rs.1000 |
2 | M.Suresh
R.Vinothkumar S.P.Deepak Kumar |
SRM Easwari Engineering College | Sensor Helmet without Key and alcohol inspector | Rs.750 |
Date | Name of the Workshop | Co ordinator |
25.03.2015 | Nano –Materials: Synthesis and Characterization and Application (NSCA-2015) |
Dr.PaulTheophilusRajakumar Professor |
12.09.2014 | Regulated and unregulated engine emissions and its control technologies | Dr.N.Nithyanandan Professor and Head |
25.03.2015 | Nano –Materials: Synthesis and Characterization and Application (NSCA-2015) |
Dr.PaulTheophilusRajakumar Professor |
12.09.2014 | Regulated and unregulated engine emissions and its control technologies | Dr.N.Nithyanandan Professor and Head |
16.09.2013 | Engine Emissions & its control technologies | Dr.N.Nithyanandan Professor and Head |
08.01.2014 | Practical Aspects of Finite Element Analysis (PAFEA 2014) |
Dr.N.Nithyanandan Professor and Head |
Date | Name of the Seminar | Co ordinator |
03.08.2015 | Programmable logic control | Dr.PaulTheophilusRajakumar Professor |
22.02.2016 | Refrigeration and Air-Conditioning | Mr. S.Shanmugasundaram Assistant Professor |
27.09.2014 | Advanced technologies used in product design & Development | Mr.B.Dhanasakkaravarthi Assistant Professor (G -I) |
24.01.2014 | Tool & Die making. | Mr.K.Balasubramanian Associate Professor |
13.09.2013 | Challenges &Oppurtunities on Power Generation | Dr.PaulTheophilusRajakumar Professor |
10.02.2014 | Recent Trends in Automobile Engineering | Dr.PaulTheophilusRajakumar Professor |
Date | Name of the Short Term Course | Coordinator |
29.06.2015 to 20.08.2015 | CNC programming and operations | Mr.G.Ganakumar Assistant Professor |
29.06.2015 to 08.09.2015 (Spell-I) | CATIA-V5 | Mr.G.Senthil Kumar Assistant Professor (G -I) |
08.02.2016 to (24.02.2016 Spell-II) | ||
01.07.2015 to 11.07.2015 | NDT(Level-II) | Dr.PaulTheophilusRajakumar Professor |
04.08.2014 to 18.08.2014 | CNC Programming and operaion | Mr.G.Ganakumar |
02.03.2015 to 11.03.2015 | NDT | Dr.PaulTheophilusRajakumar Professor |
25.06.2014 to 08.08.2014 (Spell-II) | CATIA-V5 | Mr.G.Senthilkumar Assistant Professor (G -I) |
19.02.2014 to 21.02.2014 | Fundamentals of Computational Fluid Dynamics-A practical approach | Dr.N.Nithyanandan Professor and Head |
01/07/2013 to 09/08/2013 | CATIA-V5 | Mr.G.Senthilkumar Assistant Professor (G -I) |
S.no | Date | Topic | Venue | Number of Participants | Coordinators |
1 | 09.07.2015 | Expectation of industries from the students | AV HALL | 149 | Dr.PaulTheophilusRajakumar Professor |
2 | 31.07.2015 | Industrial application of strength of materials (SOM) | AV HALL | 300 | Mr.P.Selvaraju Assistant Professor |
3 | 08.02.2016 | Synthesis of Mechanism | AV HALL | 300 | Mr.AmosGamaleal David Assistant Professor |
4 | 10.02.2016 | Design of transmission system in industrial applications(DTS) | AV HALL | 224 | Mr.C.Velmurugan Assistant Professor |
5 | 31.07.2014 | Pollution from the industries | AV HALL | 149 | Dr.N.Nithyanandhan |
6 | 08.08.2014 | Product design and Development | AV HALL | 225 | Dr.PaulTheophilusRajakumar Professor |
7 | 23.01.2015 | Micro machining | AV HALL | 225 | Mr.C.Parthasarathy Assistant Professor |
8 | 28.01.2015 | Non-Destructive Testing | AV HALL | 149 | Dr.PaulTheophilusRajakumar Professor |
9 | 30.01.2015 | Abrasive water jet machining | AV HALL | 149 | Dr.N.Nithyanandan Professor and Head |
10 | 23.08.2013 | Recent trends in design of fasteners | AV HALL | 72 | Mr.H.ManikandanMr.N.Kandavel |
11 | 30.08.2013 | Material behaviour in machining | CONFERENCE HALL | 72 | Dr.N.Nithyanandan Professor and Head |
12 | 07.02.2014 | Role of pneumatics in industrial automation | AV HALL | 72 | Mr.K.Balasubramanian |
13 | 12.03.2014 | Advances in propulsion | AV HALL | 72 | Dr.PaulTheophilusRajakumar Professor |
S.no | Applicant Name | Title | Copyrights / Patent | Date of Filling/ ROC Date | Status | Application No./ Registration No. |
1 | Dr.T.G.SAKTHIVEL | An Automated Method And System For Gravitational Transportation Of Minerals Along With Segregation | Patent | 18/01/2020 | Published
24/01/2020 |
202041002231 |
Date | Name of the Symposium | Coordinator |
07.03.2015 | MECHREVZ’15 | Mr.H.Manikandan Assistant Professor Mr.S.Malligarjunan Associate Professor |
01.03.2014 | MECHREVZ’14 | Mr.H.Manikandan Assistant Professor Mr.S.Malligarjunan Associate Professor |
Date | Name of the Conference | Venue | Participants | No. of Participants | Coordinator |
14-05-2015 | Innovative & Emerging Trends in Engineering & Technology | CONFERENCE HALL &AV HALL | Students from other colleges | 20 | Mr. S.Parthasarathy |
Date | Name of the Project Expo | Coordinator |
21.03.2015 | Project Expo’15 | Mr.Rajakarthikeyan |
22.03.2014 | Project-Expo’2014 | Mr.RajaKarthikeyan |
International Events | |||||||
S.No | Name of the Student | Year/Sem | Name of the Event | Title of the program | Venue | Date | Participation / Award |
1 | Jason Daniel M | III/V | SAUVC-2014-15 | Singapore Autonomous under water vehicle competition | Singapore polytechnic | 06.03.2015 to 08.03.2015 |
Participated |
2 | Arvindkumar S | III/V | SAUVC-2014-15 | Singapore Autonomous under water vehicle competition | Singapore polytechnic | 06.03.2015 to 08.03.2015 |
Participated |
3 | Jason daniel M Raviraja S Bhuvaneshwaran P Keerthivasan S Rohit M Prabhu M Naveein E Naveen G Om prakash R Harwinramoj R Rajkumar V Arvindkuumar S |
III/VI | 23rd Singapore Robotic Games 2016 | RC sumo robot competition | TayEng Soon Convention Centre, Singapore | 27.01.2016 to 28.01.2016 | Participated |
National Events | |||||||||
S.No | Name of the Student | Year/Sem | Name of the Event | Title of the program | Venue | Date | Participation / Award | ||
1 | Jason Daniel M | III/V | NEC -2014-15 | National Entrepreneur Challenge | IIT, Bombay | 30.01.2015 to 31.01.2015 | Secured finalist position | ||
2 | Rajkumar V | IV/VII | NEC -2014-15 | National Entrepreneur Challenge | IIT, Bombay | 30.01.2015 to 31.01.2015 | Participated | ||
3. | Jason Daniel M | III/V | A national level B-plan competition | BIZENCE 2015 | EDC,SIESGST,Nerul. | 24/02/2015 | Participated | ||
4 | Rajkumar V | IV/VII | A national level B-plan competition | BIZENCE 2015 | EDC,SIES GST, Nerul. | 24/02/2015 | Participated | ||
5 | Yaswanth M | III/VI | ISTE | Best project award | Baba bandasinghbahadur engineering college (punjab) | March 2014 | Best Project | ||
6 |
Philemon M
|
IV/VII | Institution of Engineers | All India Design Competition for Engineering Students | The instituttion of engineers (dharwad) | 10.10.2015 to 11.10.2015 | Silver Medal | ||
7 | Ramalingam P Rathiesh. G.B Naveein. E Prakash. M |
III/VI | Institution of engineers | The instituttion of engineers,AERI,Hosur | 03.03.2016 to 04.03.2016 | Best Project | |||
8 | BalaAnand. R Arun . K.S Baskaran. K Daniel.R |
VI/VIII | Institution of engineers | The instituttion of engineers,AERI,Hosur | 03.03.2016 to 04.03.2016 | Best Project | |||
9 | Philemon P Rajkumar V ArjunPrakash M Jason daniel M Mohan raj S Nanda kumar M Sathya Narayanan S Harwinramoj R Naveeth Imran N Dhanush C |
IV/VIII & III/VI |
Aero Modelling’2016 | Hindustan University | 16.03.2016 to 19.03.2016 | Best Design (3rd POSITION) |
|||
10 | Gokula Krishnan S Venkatesan J Vignesh R Logendran R Vignesh S Hari Krishnan S Ramprasad S Ajith V Aravind S Sounder P Akash S Mugilan A Harish A Veeramanilogeswaran |
III/VI & II/IV |
ECO-KART-2016 | BMLMunjal University (Haryana) | 10/03/2016 to 13/03/2016 | Best Captain | |||
11 | Arun K.S Balaanand B Bhuvaneswaran P Gerard amalan F Neerajkumar M Bharathkumar R Gokul D Dhayanithi TSathyanarayan S Dhanush C |
IV/VII & III/V |
EFFICYCLE’2015 | Lovely professional university (LPU), Jalandhar | 15/11/2015 to 18/11/2015 | Participated | |||
12. | Rajkumar V Jason Daniel M Arjunprakash M Arun K.S Aravindkumar S |
III/V | SAE BAJA Virtual Round of All Terrain Vehicle | Chitkara University, Patiala, Punjab | 10/07/2015 & 11/07/2015 | Participated |